Visa Developer Community

Hello  Jacek,    Thank you for your inquiry. The IAT/ICA number is not related to the Visa Developer Portal. Please contact your issuing bank to get the IAT/ICA number.   Thank you, Vaibhav  ... View more

Hi @ Wilson,    When you call the Payment Account Validation API, an Account Verification will always be performed for the requested account. The Action Code in the response message indicates the result of the verification check. If there are no negative conditions, and the account is in good standing, the Action Code will contain code 00 (approved) or code 85 (no reason to decline) and an Approval Code will be included in the response message. For unsuccessful verifications, the issuer or Visa (acting on the issuer's behalf) will return an appropriate negative response code. You can find a complete listing of all of the Action Code values on the   Request and Response Code Reference. In addition to Account Verification, you must perform either an Address Verification or a CVV2 Validation (or both) on the requested account. The API determines which of the optional services to perform based on the presence or absence of additional fields in the request message.   VDP Sandbox is a test environment hence actual cards will not give proper response. Please use test data from VDP Portal for sandbox calls.   For actual cards, production access would be needed.   Let me know if you have any additional questions.    Thank you,  Vaibhav  ... View more

Hello @ diana,     If you wish to integrate with Visa Checkout, please follow the integration guides below.   https://developer.visa.com/capabilities/visa_checkout/docs   Visa Checkout is not currently running any promotions or facilitating integration assistance for donations.     Please remember you need to have an active merchant acquiring account to process Visa Checkout transactions.   Thank you,  Vaibhav  ... View more

Hi @ Deborah193,    There is some additional information needed from you. Could you please reach out to Developer@visa.com.   Thank you,  Vaibhav  ... View more

Hi @ asraro,    I am woking on your request, I will get back to you soon.    Thank you,  Vaibhav  ... View more

test ... View more

Hello @ Manu_Ashok ,    The Visa Offers Platform (VOP) provides partners access to qualified Visa transaction data of enrolled cardholders. By integrating with the Visa Offers Platform, partners can enhance their own loyalty and offer programs in new and powerful ways. The Visa Offers Platform accesses the VisaNet authorization stream to monitor enrolled cardholder transactions in real time and send relevant notifications to partners. Also, it monitors the settlement stream for settled transactions and sends relevant notifications to the partners. Using these APIs, partners can integrate Visa Offers Platform capabilities and transaction data into their own web and mobile applications.   The VOP APIs use mutual SSL authentication and channel encryption, which requires you to obtain a user ID and password as well as, install a PKI certificate issued by Visa. You can get test credentials online in the Application Console for sandbox testing. Production credentials will be supplied to you as part of the production client on-boarding process. All program providers must be PCI compliant to use Visa’s Web services APIs. A third-party consulting organization must perform a PCI audit on an annual basis in order to demonstrate compliance. Please refer to the PCI Security Compliance Standards for more information.   PCI compliance is not required for working in the sandbox environment, as this area only uses test card numbers.   If you are looking to integrate with payment methods using token authentication, please look at the following APIs.    CyberSource Payments - https://developer.visa.com/capabilities/cybersource/docs Visa Checkout - https://developer.visa.com/capabilities/visa_checkout   In addition, please check our website for specific APIs relevant to your business case https://developer.visa.com/ https://developer.visa.com/apibrowser   Please let me know if you have any questions.    Thank you,  Vaibhav  ... View more

Hello @ ricz ,    Thank you for your inquiry. To further investigate, please provide the following information: 1. End Point 2. Request Header 3. Request Body 4. Response Header (include the x-correlation-id) 5. Response Body Using SoapUI, you can find the x-correlation-id in the Raw Tab of the response header.   Oncec you have the information above, please forward the response for above questions at Developer@visa.com.    Thank you,  Vaibhav  ... View more

Hello @ rbrandenburg,    Per your response below you are   generating payment tokens using v1of the Secure Acceptance Flex Token API.  If you are a developer testing on v1 CyberSource APIs then this version was recently deprecated. You will need to move to v2 CyberSource APIs going forward. Could you please upgrade to V2 and try again.    Let me know if you have any questions.    Thank you,  Vaibhav ... View more

Hello @ AndrewMoore,    I tried this and it worked fine for me. Can you please retry and provide us the x-correlation-id & end point URL if issue still persists.   JSON format had some issues in the below. I had to correct it to make it work.   Updated Format Below   { "globalControls": [ { "isControlEnabled": true, "shouldAlertOnDecline": false, "shouldDeclineAll": true, "shouldTargetSpecificCard": "false" } ], "transactionControls": [ { "isControlEnabled": true, "shouldDeclineAll": false, "shouldAlertOnDecline": false, "shouldTargetSpecificCard": false, "controlType": "TCT_ATM_WITHDRAW" }, { "isControlEnabled": true, "shouldDeclineAll": false, "shouldAlertOnDecline": false, "shouldTargetSpecificCard": false, "controlType": "TCT_CROSS_BORDER" }, { "isControlEnabled": true, "shouldDeclineAll": false, "shouldAlertOnDecline": false, "shouldTargetSpecificCard": false, "controlType": "TCT_CONTACTLESS" }, { "isControlEnabled": true, "shouldDeclineAll": false, "shouldAlertOnDecline": false, "shouldTargetSpecificCard": false, "controlType": "TCT_BRICK_AND_MORTAR" }, { "isControlEnabled": true, "shouldDeclineAll": false, "shouldAlertOnDecline": false, "shouldTargetSpecificCard": false, "controlType": "TCT_E_COMMERCE" } ] }   Thank you,  Vaibhav  ... View more

Hello @ JLPena,    Updates are done on business days, no later that midnight GMT.    Thank you,  Vaibhav  ... View more

Hello @ AndrewMoore,    I am working on your inquiry, I will get back to you soon.    Thank you,  Vaibhav  ... View more

Hi Uday,    Apologies for the delay. Could you try from different networks like 4G/Home, additionally, could you provide the following items?   · Android manifest file · Code base that’s being used for visa checkout · Apikey that’s being used during this testing · Development version of the apk     Thank you,  Vaibhav  ... View more

Hello,    Have you passed the token  that you generated through Secure Acceptance Flexible Token API to process payment API, under payment information object like paymentInformation -> customer -> customerID.    Also, please send us the following to debug futher.   Request Header and Body Response Header and Body Groovy script associated to this request Which version of CyberSource are you using? Thank you,  Vaibhav  ... View more

Hello @ DavidHB,    At this time, we do not have the functionality where you can filter the transactions by month. We are currently working on that enhancement which will be released in the future release.     But I recommend you to take a look at Visa Account Management Suite which might be a good fit https://developer.visa.com/capabilities/visa_account_management_suite   Thank you,  Vaibhav  ... View more

Hello @ HAATSALAB,    Please check our website for specific APIs relevant to your business case https://developer.visa.com/ https://developer.visa.com/apibrowser   In addition, please look at our payment methods API:  https://developer.visa.com/site/payment-methods   Please follow the steps in the “Get Started” link below to register and create a Visa Developer application. https://developer.visa.com/pages/working-with-visa-apis   This guide walks you through the key steps for application creation, credentials, and connection validation.   Thank you,  Vaibhav   ... View more

Hello @ amortensen,    I know Visa Direct has this functioanlity but i cannot confirm if it is possible outside of Visa Direct. I am still looking around for documentation if it is possible, I will get back to you soon.    Thank you, Vaibhav    ... View more

Hello @ jhackett,    You can only block the Merchant Category Code. VTC is only available for Issuer bank and independent developer who are sponsored by Issuing bank. For more inforamtion on VTC please review the documentation at this link https://developer.visa.com/capabilities/vctc/docs   Thank you,  Vaibhav  ... View more

Hello @ Erfan,    Please update the groovy script with the below and add the Request Payload and test. Request Payload   { "clientReferenceInformation":   {   "code":   "TC50171_3"   },  "processingInformation":   {   "commerceIndicator":   "internet"   },"aggregatorInformation": { "subMerchant":  { "cardAcceptorID": "1234567890", "country": "US",  "phoneNumber": "650-432-0000", "address1":"900 Metro  Center", "postalCode":  "94404-2775", "locality": "Foster  City", "name": "Visa  Inc", "administrativeArea":  "CA", "region":"PEN", "email": "test@cybs.com"  }, "name": "V-Internatio", "aggregatorID":  "123456789" }, "orderInformation": {  "billTo": { "country":"US", "lastName": "VDP", "address2": "Address 2", "address1": "201 S. Division St.", "postalCode": "48104-2201", "locality": "Ann Arbor","administrativeArea": "MI", "firstName": "RTS", "phoneNumber": "999999999", "district": "MI", "buildingNumber": "123", "company": "Visa","email":  "test@cybs.com" },  "amountDetails":  { "totalAmount":  "102.21",  "currency": "USD"  } },  "paymentInformation":  { "card":  {"expirationYear":  "2031",  "number":   "5555555555554444",  "securityCode":  "123",  "expirationMonth":  "12",  "type":   "002"  }  }  }   Groovy Script import javax.crypto.Mac; import javax.crypto.spec.SecretKeySpec; def hmac(String secretKey, String data) { Mac mac = Mac.getInstance("HmacSHA256") SecretKeySpec secretKeySpec = new SecretKeySpec(secretKey.getBytes(), "HmacSHA256") mac.init(secretKeySpec) byte[] digest = mac.doFinal(data.getBytes()) return digest }                        def APIKey = 'ML0H1V41TFGN6FQQ4QJM21OIVovNYRupFrUkHbFjZZ8vftXxs' def sharedSecret = 'Qa+Ik$0PhYWlnE+9qOy1qWgenxqU5CPZ@htRuz+2' def URI = "v2/payments" def QS = "apikey="+APIKey def timeStampUTC = String.valueOf(System.currentTimeMillis().intdiv(1000L)) def payload = '{ "clientReferenceInformation":   {   "code":   "TC50171_3"   },  "processingInformation":   {   "commerceIndicator":   "internet"   },"aggregatorInformation": { "subMerchant":  { "cardAcceptorID": "1234567890", "country": "US",  "phoneNumber": "650-432-0000", "address1":"900 Metro  Center", "postalCode":  "94404-2775", "locality": "Foster  City", "name": "Visa  Inc", "administrativeArea":  "CA", "region":"PEN", "email": "test@cybs.com"  }, "name": "V-Internatio", "aggregatorID":  "123456789" }, "orderInformation": {  "billTo": { "country":"US", "lastName": "VDP", "address2": "Address 2", "address1": "201 S. Division St.", "postalCode": "48104-2201", "locality": "Ann Arbor","administrativeArea": "MI", "firstName": "RTS", "phoneNumber": "999999999", "district": "MI", "buildingNumber": "123", "company": "Visa","email":  "test@cybs.com" },  "amountDetails":  { "totalAmount":  "102.21",  "currency": "USD"  } },  "paymentInformation":  { "card":  {"expirationYear":  "2031",  "number":   "5555555555554444",  "securityCode":  "123",  "expirationMonth":  "12",  "type":   "002"  }  }  }' def HMACDigest = hmac(sharedSecret, timeStampUTC + URI + QS + payload) def encodedDigest = HMACDigest.encodeHex().toString() def XPayToken = "xv2:"+ timeStampUTC + ":" + encodedDigest testRunner.testCase.setPropertyValue("xpayToken", XPayToken) log.info(XPayToken)   Thank you,  Vaibhav  ... View more

Hello @ emiliojoel,    To get quote, please contact the CyberSource team at this link https://support.cybersource.com/s/article/How-Do-I-Contact-CyberSource-Customer-Support   Let me know if you have any questions.    Thank you,  Vaibhav  ... View more

Hello @ Aj4991,    Please check our website for specific APIs relevant to your business case https://developer.visa.com/   In addition, please take a look at our payment methods API like: CyberSource Payments, Visa Checkout, Visa Direct   Please follow the steps in the “Get Started” link below to register and create a Visa Developer application. https://developer.visa.com/pages/working-with-visa-apis   This guide walks you through the key steps for application creation, credentials, and connection validation.   Let me know if you have any additional questions.    Thank you,  Vaibhav  ... View more

Hello @ emiliojoel,    To check the pricing for the transaction, you will have to submit a going live request on VDP. Once you submit the going live request for our Cyber Sourcec team will contact you with the updates and next steps to be taken.    To submit a going live request, please follow the instructions at the link below https://developer.visa.com/pages/going-live   Thank you,  Vaibhav  ... View more

Hi @ masiddiqui91,    The transactions that you see in the sandbox is canned data. To see the real time transactions, you will have to take your project to higher environment, which is certification and then production.    Please follow the instructions at the link below to submit the Going-Live request https://developer.visa.com/pages/going-live#    Thank you, Vaibhav ... View more

Hi @ Erfan,    Thanks for reaching out. We are checking on our end. Please share the groovy script and SOAP UI Project to help debug further.   Thank you,  Vaibhav      ... View more

Hi @ rbrandenburg ,    Please make sure you pass the token that you generated through Secure Acceptance Flexible Token API to process payment API, under payment information object like paymentInformation -> customer -> customerID.    Let us know if you have any questions.    Thank you,  Vaibhav  ... View more

Hi @ Uday,    Apology for the delay. I have opened an incident with our engineering team and they have been able to reproduce the bug and they are working on to fix the bug. We will update you soon on this.    Thank you,  Vaibhav  ... View more

Hi JP,    As suggested by Milioner, Kindly make sure that you create p12 file using command from github "openssl pkcs12 -export -out p12certfile.p12 -inkey key.pem -in cert.pem". Please note the absence of the -certfile attribute. There is a peculiarity with the way the p12 is built for .NET where the file included in -certfile can only contain root certificates.   Kindly share the x-correlation-id from response header and the complete response to troubleshoot further.   Thank you,  Vaibhav  ... View more

Hi @ Uday,    I am working on your request, I will get back to you soon.    Thank you,  Vaibhav  ... View more